# Button Lock Out

**URL:** <https://forum.reekon.tools/t/button-lock-out/2663>\
**Category:** T1 Tomahawk\
**Created:** [April 10, 2025, 7:22pm UTC](https://forum.reekon.tools/t/button-lock-out/2663 "2025-04-10T19:22:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pgunni](https://avatars.discourse-cdn.com/v4/letter/p/9fc348/32.png) [@Pgunni](https://forum.reekon.tools/u/Pgunni)\
**Post date:** [April 10, 2025, 7:22pm UTC](https://forum.reekon.tools/t/button-lock-out/2663/1 "2025-04-10T19:22:25Z")

</div>

I plan to use this in a warehouse to automatically capture pallet heights. My concern is the operator will accidently changes the units and not realize it. is there a physical or program way to lock out buttons other than the capture?

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [April 10, 2025, 7:28pm UTC](https://forum.reekon.tools/t/button-lock-out/2663/2 "2025-04-10T19:28:44Z")

</div>

Hello, there isn’t a way to lock buttons but units are always interchangeable (so you can convert saved measurements at any point)