# Firmware updated - no tape calibration msg

**URL:** <https://forum.reekon.tools/t/firmware-updated-no-tape-calibration-msg/2150>\
**Category:** T1 Tomahawk\
**Created:** [May 4, 2024, 5:56pm UTC](https://forum.reekon.tools/t/firmware-updated-no-tape-calibration-msg/2150 "2024-05-04T17:56:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tripleddd](https://avatars.discourse-cdn.com/v4/letter/t/e8c25b/32.png) [@tripleddd](https://forum.reekon.tools/u/tripleddd)\
**Post date:** [May 4, 2024, 5:56pm UTC](https://forum.reekon.tools/t/firmware-updated-no-tape-calibration-msg/2150/1 "2024-05-04T17:56:05Z")

</div>

Good day - I have successfully updated the T1, but I get no “Blade Setup” (calibration required) as per the instructions located here: [https://support.reekon.tools/hc/en-us/articles/16076772301972-Updating-T1-Tomahawk-Firmware](https://support.reekon.tools/hc/en-us/articles/16076772301972-Updating-T1-Tomahawk-Firmware).

Should I calibrate the tape or not?

Thanks in advance for the help!

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [May 4, 2024, 7:03pm UTC](https://forum.reekon.tools/t/firmware-updated-no-tape-calibration-msg/2150/2 "2024-05-04T19:03:00Z")

</div>

Hello, no need to with the new firmware, it leverages the saved one in version 0.5.13 and beyond!

---

<div class="post-metadata">

**Author:** ![tripleddd](https://avatars.discourse-cdn.com/v4/letter/t/e8c25b/32.png) [@tripleddd](https://forum.reekon.tools/u/tripleddd)\
**Post date:** [May 4, 2024, 7:36pm UTC](https://forum.reekon.tools/t/firmware-updated-no-tape-calibration-msg/2150/3 "2024-05-04T19:36:14Z")

</div>

Many thanks for this information.