# Issues after firmware updates

**URL:** <https://forum.reekon.tools/t/issues-after-firmware-updates/2800>\
**Category:** T1 Tomahawk\
**Created:** [December 31, 2025, 3:18am UTC](https://forum.reekon.tools/t/issues-after-firmware-updates/2800 "2025-12-31T03:18:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cparas101](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/cparas101/32/585_2.png) [@cparas101](https://forum.reekon.tools/u/cparas101)\
**Post date:** [December 31, 2025, 3:18am UTC](https://forum.reekon.tools/t/issues-after-firmware-updates/2800/1 "2025-12-31T03:18:59Z")

</div>

Asking to calibrate blade! I have gone through over and over but get to 4” and than click + and comes back with too far out of range! Please help I will attach a video!

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [December 31, 2025, 11:50am UTC](https://forum.reekon.tools/t/issues-after-firmware-updates/2800/2 "2025-12-31T11:50:20Z")

</div>

hey Chris, would be happy to help if you share a video, thanks!