# M1 after calibration and setting 3/32 blade size

**URL:** <https://forum.reekon.tools/t/m1-after-calibration-and-setting-3-32-blade-size/2650>\
**Category:** M1 Caliber\
**Created:** [March 26, 2025, 9:14pm UTC](https://forum.reekon.tools/t/m1-after-calibration-and-setting-3-32-blade-size/2650 "2025-03-26T21:14:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dduck10](https://avatars.discourse-cdn.com/v4/letter/d/9dc877/32.png) [@dduck10](https://forum.reekon.tools/u/dduck10)\
**Post date:** [March 26, 2025, 9:14pm UTC](https://forum.reekon.tools/t/m1-after-calibration-and-setting-3-32-blade-size/2650/1 "2025-03-26T21:14:14Z")

</div>

After Calibration and setting the blade size. When I am ready to start my cuts, just moving the material causes the readout to just move to a number like 22249 0. I zero it out again. just trying to make 1’-5" cuts as soon as I push the wood to get the measurement the numbers are not correct it lands on some crazy number.

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [March 26, 2025, 9:50pm UTC](https://forum.reekon.tools/t/m1-after-calibration-and-setting-3-32-blade-size/2650/2 "2025-03-26T21:50:39Z")

</div>

Hello, sounds like there may be a magnet or encoder issue - please send a video to contact@reekon.tools and well take a look!