# M1 Caliber full product dimensions **URL:** \ **Category:** M1 Caliber\ **Created:** [June 22, 2025, 10:30am UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729 "2025-06-22T10:30:58Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![VulpesMiko](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/vulpesmiko/32/675_2.png) [@VulpesMiko](https://forum.reekon.tools/u/VulpesMiko)\ **Post date:** [June 22, 2025, 10:30am UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/1 "2025-06-22T10:30:58Z")
Hiya, I’m designing a 3d printed cutting box for my GCB 18V-63 bandsaw, and I intend to integrate the M1 into the design of the box If I only cut profile and other similar items with a large width, I could make it be a standard fence and be done with it, but because I’m cutting smaller items like M8 screw rods, I want the measurement wheel to be as close to the wall as possible, so I might design an offset fence to achieve this if the wheel isn’t close enough to the fence ![20250622_122647](https://canada1.discourse-cdn.com/flex029/uploads/reekontools/original/1X/db13b092eae9cb814a8f32b5d49d74fb253cb515.jpeg) If anyone could provide me with these two measurements, that would be much appreciated I’d do it myself, but I’ll be away from the jobsite for two weeks, so I won’t have access to my M1 ---
**Author:** ![BirdmanTheWelder](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/birdmanthewelder/32/499_2.png) [@BirdmanTheWelder](https://forum.reekon.tools/u/BirdmanTheWelder)\ **Post date:** [June 24, 2025, 7:11pm UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/2 "2025-06-24T19:11:57Z")
X = 126mm or 4-15/16"" Y = 6mm 0r 1/4" Share the progress! ---
**Author:** ![VulpesMiko](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/vulpesmiko/32/675_2.png) [@VulpesMiko](https://forum.reekon.tools/u/VulpesMiko)\ **Post date:** [June 30, 2025, 6:52pm UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/3 "2025-06-30T18:52:44Z")
thanks for the help finished printing and assembling the M1 assisted cutbox, **[here’s a showcase](https://va.media.tumblr.com/tumblr_syn4t3YjbT1vh1ono_720.mp4)** ill update in 10 days when im back on site and test it out ---
**Author:** ![BirdmanTheWelder](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/birdmanthewelder/32/499_2.png) [@BirdmanTheWelder](https://forum.reekon.tools/u/BirdmanTheWelder)\ **Post date:** [June 30, 2025, 8:02pm UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/4 "2025-06-30T20:02:20Z")
Nicely done! That’s looking slick ---
**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\ **Post date:** [July 1, 2025, 12:00am UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/5 "2025-07-01T00:00:15Z")
Super cool, look forward to seeing the finished result! ---
**Author:** ![VulpesMiko](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/vulpesmiko/32/675_2.png) [@VulpesMiko](https://forum.reekon.tools/u/VulpesMiko)\ **Post date:** [July 15, 2025, 6:09pm UTC](https://forum.reekon.tools/t/m1-caliber-full-product-dimensions/2729/6 "2025-07-15T18:09:34Z")
Ill have to bring it off site one of these days to take pictures, no phones on site and all that But here’s the result so far: -its pretty accurate -im spending significantly less time vacuuming -I may be stupid but im not quite understanding the button controls and how to tell if its on or off -because of the way I designed it, its a bit hard to glide the workpiece through the jig accurately. -i will iterate on the design now that ive got valuable test data, hopefully ill remember to bring both the jig and the M1 home so I can print a second design that addresses the shortcomings of the prototype As a bonus, now all the fasteners and parts ive ordered are gonna be available to me, making printing and assembly a lot simpler