# Measuring with laser line

**URL:** <https://forum.reekon.tools/t/measuring-with-laser-line/2645>\
**Category:** T1 Tomahawk\
**Created:** [March 26, 2025, 1:19am UTC](https://forum.reekon.tools/t/measuring-with-laser-line/2645 "2025-03-26T01:19:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mforce76](https://avatars.discourse-cdn.com/v4/letter/m/e8c25b/32.png) [@Mforce76](https://forum.reekon.tools/u/Mforce76)\
**Post date:** [March 26, 2025, 1:19am UTC](https://forum.reekon.tools/t/measuring-with-laser-line/2645/1 "2025-03-26T01:19:06Z")

</div>

Hello,  
I was making some cut marks over the weekend and I realized the marks I made with the laser line were off by about 1/16th of an inch or so. I see the laser is lined up perfectly on the tape but my mark is off. Is there something I’m doing wrong or is there an adjustment I can make? Thanks!

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [March 26, 2025, 9:46am UTC](https://forum.reekon.tools/t/measuring-with-laser-line/2645/2 "2025-03-26T09:46:26Z")

</div>

Hello, yes the laser line is fully adjustable based to your preference - you can see the adjustment instructions here - [https://support.reekon.tools/hc/en-us/articles/16076354734100-Adjusting-the-Laser-Position-of-the-T1-Tomahawk](https://support.reekon.tools/hc/en-us/articles/16076354734100-Adjusting-the-Laser-Position-of-the-T1-Tomahawk)