# Push Calculated Measurements to T1

**URL:** <https://forum.reekon.tools/t/push-calculated-measurements-to-t1/2145>\
**Category:** Feature Requests & Ideas\
**Created:** [May 2, 2024, 5:38pm UTC](https://forum.reekon.tools/t/push-calculated-measurements-to-t1/2145 "2024-05-02T17:38:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gedascher](https://avatars.discourse-cdn.com/v4/letter/g/258eb7/32.png) [@gedascher](https://forum.reekon.tools/u/gedascher)\
**Post date:** [May 2, 2024, 5:38pm UTC](https://forum.reekon.tools/t/push-calculated-measurements-to-t1/2145/1 "2024-05-02T17:38:27Z")

</div>

It would be great to have the ability to PUSH calculated measurements from the Rock app back to the T1 in the group where that measurement was added. That would allow us to choose that measurement and use the Layout Guide to mark and cut. Either do it automatically, or have an additional button/link on the measurement to PUSH.

---

<div class="post-metadata">

**Author:** ![therock](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.reekon.tools/therock/32/9_2.png) [@therock](https://forum.reekon.tools/u/therock)\
**Post date:** [May 2, 2024, 6:32pm UTC](https://forum.reekon.tools/t/push-calculated-measurements-to-t1/2145/2 "2024-05-02T18:32:25Z")

</div>

Thanks for the suggestion! 2 way communication and synchronizing with the ROCK App \<\> EPpaper display are areas we are exploring further!