# Squaring feature and run/rise calcs

**URL:** <https://forum.reekon.tools/t/squaring-feature-and-run-rise-calcs/1805>\
**Category:** Feature Requests & Ideas\
**Created:** [January 30, 2024, 7:33pm UTC](https://forum.reekon.tools/t/squaring-feature-and-run-rise-calcs/1805 "2024-01-30T19:33:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Roderick](https://avatars.discourse-cdn.com/v4/letter/r/9fc348/32.png) [@Roderick](https://forum.reekon.tools/u/Roderick)\
**Post date:** [January 30, 2024, 7:33pm UTC](https://forum.reekon.tools/t/squaring-feature-and-run-rise-calcs/1805/1 "2024-01-30T19:33:09Z")

</div>

We cut a lot of wood to proportions that require the structure to be square.  
Typically, that requires combinative measurements to ensure the results are true.  
By having a feature that could take the basis of existing assembly measurements, it could simplify this verification process.  
These of course would be X - Y coordinates for reference.

Another cool idea would be for stairs. Knowing the Run and Rise and how many treads were required, the capability of producing horizontal and vertical cut measurements would simplify the task.